Showing posts with label embelishments. Show all posts
Showing posts with label embelishments. Show all posts

Tuesday, November 4, 2014

Binder Upgrade

Hello all!  I hope that your week is going well and you are fully recovered from Halloween!  Today I thought I would share the binder I made to go with those Divider Pages we made the other day.  Oh and don't forget to check out the Binder Clips Upgrade as well!  Lots of pictures so hang in there!

Supplies
Mod Podge
(any will work, but I used Paper)
Foam brush
Chip board letters
scissors
scrapbook papers
Note:Similar products or the same that I used are in the JCC Blog store! It is just to the right, toward the top! You can see my price break down and where I got the products at the bottom of this post.

 
The Smash Binder came with a cardboard piece that kept it flat, I left this in to keep my surface easier to work on. 

First I laid out my chip board letters.  I am asking for your silence in the name you see!  I am considering starting a tea blog and this will be the name T.E.A (Tea Emporium and Apothecary).
I had to over lap some of my letters to make them fit on the binder.  I used a heavy book (just happened to be my Mennonite Cookbook) to help hold the letters down while they dried. 

Glued on! 
I bought new boots!  Target clearance, baby! I was wearing them while doing this to start breaking them in.
I then took a paper that had all the colors of my Divider Pages to cover the inside (front and back) 
I didn't like the edges so when I saw this one with the stripes I knew I could easily (or lazy) cut pieces to fit without measuring. 
See my bubbles!  Make sure you smooth your pages out!  These came after I put a layer of Mod Podge over them to seal it.  They did smooth out some as they dried. 

My kids told me I needed to check out the sunset! 
Here is the finished binder with my Divider Pages showing. 
I love this paper and have been saving it for something I would see daily.  I used it to make a pocket on the front and... 
...the back inside covers of the binders.  You could also do this on your Divider Pages, by simply gluing 3 of the sides down, leaving the top open. 

Binder Supplies Breakdown
This is for the ENTIRE binder project
Smash Binder $5.99 (Michael's)
Chip Board Letters $1.50 each (Michael's)
I used 2 packages to get enough solid colored letters)
Divider pages (left over from a previous project)
12X12 Paper packet, 15 pages $3 (Hobby Lobby, clearance rack)
Mod Podge $10.99-40% off coupon (Hobby Lobby)
Obviously I didn't use it all so maybe $0.25
Embellishments $1 (Rummage Sale)
Again didn't use them all so maybe $0.05
Lined paper (free-ish)
My kids had brought home several notebooks from school last year and I tore out the few pages that were left.  Maybe 3 notebooks, I then trimmed the edges.
Total Cost for Binder Project
$10.79 (ish)


Monday, October 20, 2014

DIY Divider Pages with Tabs

 I hope you had a wonderful weekend!  Ours was filled with family time and lots of fun! 

Today I wanted to share how I made divider pages for my Tea Encyclopedia.  the Tea Encyclopedia is what I am putting together.  It is all about different teas, their uses and recipes.  As I have said before I am hoping to start a Tea Shop of my own some day!  So let the research begin! 

I didn't want to go purchase tabs, which is a great option, don't get me wrong.  I just wanted them to be custom to my project.

LOTS of pictures so hang in there, I just wanted to show you the best way possible!  Don't look at my colors just the how to!  You make your colors or themes!



Supplies
Folders
 (I used some from a previous project)
Scrapbook Paper (12X12)
Mod Podge for Paper
Scissors
Foam Brush
Embellishments
Tacky Glue
Hole punch

If you have cereal boxes you can cut them to size.  There are a lot of good ways to make the tabs on Pinterest as well!


I cut them in half.  I plan to use the side without tabs as sub folders, so I will make tabs to go on those later.
 
Shhh the J in J. Celeste is Jaime!
 

I then spread the Mod Podge for Paper all over the side, making sure to cover the edges well. 

Flip over and press to the back side of your paper. 

If you get any bubbles simply smooth out the page. 

Trim to fit. Repeat on the other side!

 I have a crate with all of my embellishments separated, you can see in the Craft Hack Blog.  I found my Romantic/Hearts folder as well as my Illustrations and added some embellishments to the folders. I also used the tags from some of my favorite teas!

I used Aleene's but any tacky glue will work.  I would make sure if it is being used daily that you use a good glue! 






Some of the other papers I plan to use! 
Punch holes to fit your binder.  I am in search of a new one as this one was well loved when I was going to school. 


I also used a Tea Tag to make a label for the Earl Grey section.  I will add others as I find them. 

I just opened the tag and put the glue on the inside and placed one side on the front of the paper and another on the back side. 

 
If you are looking for some of the supplies don't forget to check out my store.  It will be on the right side at the top.  Click on JCC Craft Picks!

Update: Check out our Binder Clip Upgrade and make them to match your Divider Pages.

Tuesday, September 23, 2014

Spoons Everywhere!

 Welcome back, or welcome for the first time!  Boy did you pick a good day to come!  I have been to a wonderful little shop downtown that I had bought a spoon necklace from.  I can't afford to buy them all so I thought I would try to create some that would work perfectly with some of my outfits.


Supplies

Mod Podge
Paper
charms/beads/embellishments
Easy Cast
Grinder
Vise Grip
Acrylic paint (toffee or rust brown)



So the very first thing I want to do is apologize for not taking pictures of my hubs as he used his grinder to cut down the spoon (save the handle!) and as he bent it!  I will get pictures when he does the next round and update this.  HERE is a link to how to do this with a vise grip and hack saw.  They explain it a lot better than I can!



I then cut the butterflies out and arranged them in the spoon.  I coated them with Mod Podge and let it completely dry!
 

I then used Toffee Acrylic paint and brushed it lightly over the spoon.
 

I then used a very damp paper towel to remove some of the paint.
 

I then flipped it over and Mod Podged on some butterflies to the back side.
 

I then added a charm.  As you can see from the picture below it isn't the same one as above.  This is where you get to change your mind, because once you pour the resin it's over!

I then used a pencil to level the spoon and following the directions of the Easy Cast I filled it just to the top.

Close up!
 


It took about 24 hours for it to dry, because our weather has been amazing and my craftroom was the perfect temperature!  Make sure you check the required temperature on the Easy Cast box! 

I added a chain and done!  Then I went to Goodwill today and bought 16 spoons for $4 and plan on making more!  Just need to get the hubs to help me (he's protective of his tools and shop)!


 

Sunday, June 1, 2014

Bottle cap crafts

I have finally got through most of this project! It took me a little over a week of trying different products. Once I figured out which product worked most of the time was just waiting for it to dry. This is a long one with lots of pictures to hang in there with me!

I also wanted to do this project completely with things I had in my craft room. The only thing I will have to buy are the magnets to put on the back!

I started out with the bottle caps that a friend helped me save and those that I had saved. It turned out I had about 56 of them and only lost two to a product that didn't work! Not bad huh?

If you want these to be pendants for necklaces you will have to drill a hole for your eye pin. The ones you buy at the store may already have these done for you. 

After you have collected your bottle caps or bought some at the craft store you will need to sand them to help the paint stick. 


After they are sanded you can either spray paint or use acrylic paints. I used acrylic paints as that is what I had.



You will need to seal the paint so that it doesn't peel off. Again, you can buy a spray sealent or like I did you can Mod Podge. Let dry completely! I can't stress that one enough!

After it is dry you will have to cut papers to put inside the caps as your backgrounds. Again, this would have been a lot easier with a circle punch, but I'm cheap! By the time I was done with 56 of them I was pretty good at it! 

Note: today I found caps and a punch for half price at Hobby Lobby!



Then fill with embellishments!



Sorry the next pic is a little blurry.





This is also when you will need to add your eye pin or eye screw. Make sure the hole you made is filled or your resin will leak out. 

After you have filled as many as you can  (I recommend doing large lots at a time as I did above), fill with the resin/glue of your choice. Here are the ones I tried.



I recommend the Easy Cast, you will see why! 

Here I used the Dimensional Mod Podge.



As you can see it didn't work so well and is expensive when you are making as many as I did.  Luckily, I was able to pull these out and reuse the caps!

I tried the Mod Podge and it never dried, again I was able to pull them out and reuse. 

Sadly, the two below I lost to Gorilla Epoxy. It got very hot once inside the metal caps and was full of bubbles. I was not able to save these. I had to open all the windows of the craft room as well.  I will still make them into magnets and use on our board in the house.





Easy Cast was the winner as it has a degassing agent in it.  This means that within the first hour all of the bubbles will be gone! The only downfall to this product is that it takes 72 hours to dry.  I can tell you that they mean this! After 24 it is still tacky.  After 48 the top will still leave marks or finger prints. 72 hours it is fully dry and you are able to touch it.  The other perk is that it is low odor and I didn't need to worry about using it in my craft room. 

Here is the last batch that I just filled today! I would have kept going but I ran out of caps and things to put in them!



Magnets!  If you use E600 please use it in a well ventilated area!



I really had a lot of fun making these and plan to make a lot more! I will try to get individual pictures on te Facebook page as soon as everything is dry and the magnets are attatched!